SS Series Blow Moulding Machines,Stretch Blow Molding Machines

Your Position: Home > Products> > Stretch Blow Molding Machines> SS Series Blow Moulding Machines
MG-SS Series Automatic Blow Molding machines
MG_ss2500
Blow Molding Machine Video Clip(SS2600)
Blow Molding Machine Video Clip(SS4500)

Brief Introduction
Mega Machinerys' SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series blower reduces your energy expenses by up to 30% at a maximum output of 1500BPH for the signal cavity machine. Thanks to our GM Mr. Cai Yunsen who developed the patented process for spacing the performs which maximizes the performance of the MG-SS series PET blow moulding machine.
Overview
* PLC controller
MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.
* Cast molded platen with toggle clamping unit
Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.
* Infrared heating system
A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.
* Stretching system
A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.
* Patented perform spacing system
The patented perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.

* Preform loading & bottle discharging system
Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.
Features
1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
2. Patented loading system carries the preform automatically with less moving parts.
3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
4. Advanced PLC control system with a use-friendly control panel
5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
6. Multiple Reliable sensor systems monitors the machine's automatic function
7. Equipped with special designed air storage unit
8. Powerful heating unit with precision controller and convenient adjusting mechanism.
9. Cooling system that provides a perfect cooling result
10. Compact design that saves space
11. Simple installation & startup operation
12. minimal transfer space for the air distribution system.
Bottle Samples
PET bottles produced by SS series automatic reheat  PET stretch blow molding machine:
CSD 3LDetergen 500ml PET bottleEdible oil 4500ML
PET Jar-5Lpharmacal 50mlwater bottle 1L
Specification
General InformationMG-SS1500MG-SS2500/2600MG-SS3500MG-SS4500MG-SS7000MG-SS 2LMG-SS 2EL
Clamping Force14T25T31T34T63T50T55T
Clamping Stroke150MM150MM150MM150MM150MM200MM250MM
Max. Stretching Stroke370MM370MM370MM370MM380MM500MM550MM
Bottom Moving Stroke70MM70MM70MM70MM70MM70MM70MM
Number of Cavities1 Cavity2 Cavity3 Cavity4 Cavity6 Cavity2 Cavity2Cavity
Theoretical Output160 BPH2500BPH3500BPH4500BPH7000BPH1800BPH1200BPH
Max. Mould Thickness300MM300MM300MM300MM300MM290MM322MM
Space Between
Tie Bars
300X380MM400X380MM500X380MM640X380MM800X400MM----

Electrical System
Voltage Standard380v/3PH/50Hz or special order
Number of Heating Zone2 Sections2 Sections3 Sections4 Sections6 Sections5 Sections7 Sections
Total Power (MAX Loaded)20KW28KW28KW60KW216KW100KW140KW

Container
Max. Container Volume2.5L2.5L2.5L2.5L2.5L6L10L
Neck Diameter Range32MM32MM32MM32MM15-40MM50MM50MM
Max. Container Diameter35-110MM35-110MM35-110MM35-110MM35-110MM190MM220MM
Max. Container Height400MM400MM400MM400MM400MM350MM400MM

Auxiliary System
Low Air compressor8-10 Bar8-10 Bar8-10 Bar8-10 Bar8-10 Bar10Bar/2.010Bar/2.0
High Air compressor30 Bar30 Bar30 Bar30 Bar30 Bar40Barx3.040Barx3.0
Air Dryer2.0/303.0/303.0/303.0/306.0/30----

Dimension & Weight
Blow molding machine180x160x200CM200x180x220CM215x230x220CM215x250x230CM227x400x190CM290x222x230CM160X220X190cm
Preform Autoloader140x105x200CM150x120x250CM150x120x250CM150x120x250CM220x150x250CM250x160x280CM250X160X280cm
Net Weight2.6ton3.8ton4.5ton6 ton7 ton4.5T6T
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
General InformationMG-SS 4 SFMG-SS 4BFMG-SS 4LMG-SS 4ELMG-SS 6 SFMG-SS 6BFMG-SS 8SFMG-SS 10SF
Clamping Force35T37T75T80T40T45T45T60T
Clamping Stroke80MM130MM200MM250MM80MM120MM80MM80MM
Max. Stretching Stroke250MM350MM500MM550MM250MM300MM250MM250MM
Bottom Moving Stroke70MM70MM70MM70MM70MM70MM70MM70MM
Number of Cavities4 Cavity4 Cavity4 Cavity4 Cavity6 Cavity6 Cavity8Cavity10Cavity
Theoretical Output4500BPH4000BPH3000BPH2200BPH9000BPH5800BPH1000BPH12000BPH
Max. Mould Thickness300MM300MM290MM322MM200MM300MM200MM200MM
Space Between
Tie Bars
----------------

Electrical System
Voltage Standard380v/3PH/50Hz or special order
Number of Heating Zone4 Sections6 Sections5 Sections7 Sections6 Sections6 Sections6 Sections6 Sections
Total Power (MAX Loaded)48KW96KW90KW130KW120KW120KW120KW150KW

Container
Max. Container Volume600mL1.5L6L10L0.75L1.5L0.75L0.75L
Neck Diameter Range30MM32MM50MM50MM32MM32MM32MM32MM
Max. Container Diameter65MM100MM200MM220MM70MM100MM70MM70MM
Max. Container Height220MM360MM350MM400MM260MM360MM330MM260MM


Auxiliary System
Low Air compressor10Bar/1.610Bar/1.610Bar/2.010Bar/2.010Bar/2.010Bar/2.010Bar/2.010Bar/2.0
High Air compressor40Barx3.040Barx3.040Bar/3.040Bar/5.040Bar/5.040Bar/5.040Bar/6.040Bar/6.0
Air Dryer----------------

Dimension & Weight
Blow molding machine300x190x230CM510x237x210CM500x220x230CM500x220x230CM490x220x230CM700x221x210CM540x210x210cm700x210x210cm
Preform Autoloader250x160x270CM250x160x270CM250x180x280CM250x180x280CM250x180x270CM250x180x270CM250x180x270cm250x180x270cm
Net Weight4ton4.5ton9ton10ton8ton9T9T10T
Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.

Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.

Copyright © 2012 China Taizhou Huangyan MEGA Machinery Mould Co., Ltd. All Rights Reserved.
Language Tools: Chinese | Portuguese | English | Japanese | German | Arabic | Spanish | Russian | French