SS Series Blow Moulding Machines,Stretch Blow Molding Machines

Your Position: Home > Products> > Stretch Blow Molding Machines> SS Series Blow Moulding Machines
MG-SS Series Automatic Blow Molding machines
MG_ss2500
Blow Molding Machine Video Clip(SS2600)
Blow Molding Machine Video Clip(SS4500)

Brief Introduction
Mega Machinerys' SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series blower reduces your energy expenses by up to 30% at a maximum output of 1500BPH for the signal cavity machine. Thanks to our GM Mr. Cai Yunsen who developed the patented process for spacing the performs which maximizes the performance of the MG-SS series PET blow moulding machine.
Overview
* PLC controller
MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.
* Cast molded platen with toggle clamping unit
Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.
* Infrared heating system
A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.
* Stretching system
A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.
* Patented perform spacing system
The patented perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.

* Preform loading & bottle discharging system
Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.
Features
1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
2. Patented loading system carries the preform automatically with less moving parts.
3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
4. Advanced PLC control system with a use-friendly control panel
5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
6. Multiple Reliable sensor systems monitors the machine's automatic function
7. Equipped with special designed air storage unit
8. Powerful heating unit with precision controller and convenient adjusting mechanism.
9. Cooling system that provides a perfect cooling result
10. Compact design that saves space
11. Simple installation & startup operation
12. minimal transfer space for the air distribution system.
Bottle Samples
PET bottles produced by SS series automatic reheat  PET stretch blow molding machine:
CSD 3LDetergen 500ml PET bottleEdible oil 4500ML
PET Jar-5Lpharmacal 50mlwater bottle 1L
Specification
General InformationMG-SS1500MG-SS2500/2600MG-SS3500MG-SS4500MG-SS7000MG-SS 2LMG-SS 4SFMG-SS 4BFMG-SS 6SF
Clamping Force14T25T31T34T63T55T35T370KN370KN
Clamping Stroke150MM150MM150MM150MM150MM250MM80MM120MM120MM
Max. Stretching Stroke370MM370MM370MM370MM380MM550MM220MM350MM350MM
Bottom Moving Stroke70MM70MM70MM70MM70MM70MM60MM70MM70MM
Number of Cavities1 Cavity2 Cavity3 Cavity4 Cavity6 Cavity2 Cavity4 Cavity4 Cavity6 Cavity
Theoretical Output160 BPH2500BPH3500BPH4500BPH5500BPH1200BPH4000BPH3600BPH5500BPH
Max. Mould Thickness300MM300MM300MM300MM300MM320MM300MM300MM300MM
Space Between
Tie Bars
300X380MM400X380MM500X380MM640X380MM800X400MM--400X380MM500X520MM500X520MM

Electrical System
Voltage Standard380v/3PH/50Hz or special order
Number of Heating Zone2 Sections2 Sections3 Sections4 Sections6 Sections4 Sections3 Sections4 Sections4 Sections
Total Power (MAX Loaded)20KW28KW28KW60KW216KW50KW68KW53KW53KW

Container
Max. Container Volume2.5L2.5L2.5L2.5L2.5L10L600ML1.5L0.75L
Neck Diameter Range32MM32MM32MM32MM15-40MM50MM30MM32MM32MM
Max. Container Diameter35-110MM35-110MM35-110MM35-110MM35-110MM220MM65MM95MM70MM
Max. Container Height400MM400MM400MM400MM400MM400MM220MM330MM260MM

Auxiliary System
Low Air compressor8-10 Bar8-10 Bar8-10 Bar8-10 Bar8-10 Bar12Bar/2.0--8-10bar8-10bar
High Air compressor30 Bar30 Bar30 Bar30 Bar30 Bar40Barx3.0--≥30bar≥30bar
Air Dryer2.0/303.0/303.0/303.0/306.0/30--------

Dimension & Weight
Blow molding machine180x160x200CM200x180x220CM215x230x220CM215x250x230CM227x400x190CM265x210.5x200cm160X220X190cm510x237x210cm510x237x210cm
Preform Autoloader140x105x200CM150x120x250CM150x120x250CM150x120x250CM220x150x250CM250x160x280cm120X140cm250x160x270cm250x160x270cm
Net Weight2.6ton3.8ton4.5ton6 ton7 ton4.0T3.5T3.5T3.5T
Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.

Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.
 
Copyright © 2012 China Taizhou Huangyan MEGA Machinery Mould Co., Ltd. All Rights Reserved.
Language Tools: Chinese | Portuguese | English | Japanese | German | Arabic | Spanish | Russian | French