MG-SS Series Automatic Blow Molding machines
Brief Introduction
Mega Machinerys’ SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series blower reduces your energy expenses by up to 30% at a maximum output of 1500BPH for the signal cavity machine. Thanks to our GM Mr. Cai Yunsen who developed the Special technology for spacing the performs which maximizes the performance of the MG-SS series PET blow moulding machine.
Overview
* PLC controller
MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.
* Cast molded platen with toggle clamping unit
Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.
* Infrared heating system
A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.
* Stretching system
A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.
* Special preform spacing system
The special perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.
* Preform loading & bottle discharging system
Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.
Features
1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
2. Special loading system carries the preform automatically with less moving parts.
3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
4. Advanced PLC control system with a use-friendly control panel
5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
6. Multiple Reliable sensor systems monitors the machine’s automatic function
7. Equipped with special designed air storage unit
8. Powerful heating unit with precision controller and convenient adjusting mechanism.
9. Cooling system that provides a perfect cooling result
10. Compact design that saves space
11. Simple installation & startup operation
12. minimal transfer space for the air distribution system.
Bottle SamplesPET bottles produced by SS series automatic reheat PET stretch blow molding machine:
CSD 3L
PET Jar-5L
Detergen 500ml PET bottle
pharmacal 50ml
Edible oil 4500ML
water bottle 1L
Specification
| General Information | MG-SS2BF | MG-SS3BF | MG-SS4SF | MG-SS4BF |
|---|---|---|---|---|
| Clamping Force | 35T | 35T | 35T | 60T |
| Clamping Stroke | 130mm | 130mm | 90mm | 130mm |
| Max. Stretching Stroke | 400mm | 400mm | 320mm | 400mm |
| Bottom Moving Stroke | 70mm | 70mm | 70mm | 70mm |
| Number of Cavities | 2 cavity | 3 cavity | 4 cavity | 4 cavity |
| Theoretical Output | 3000BPH | 4000BPH | 5200BPH | 4500BPH |
| Max. Mould Thickness | 300mm | 300mm | 200mm | 310mm |
| Electrical System | ||||
| Voltage Standard | 380v/3PH/50Hz | or special order | ||
| Number of Heating Zone | 2 Sections | 3 Sections | 4Sections | 4Sections |
| Total Power (Full Loaded) | 35KW | 48KW | 48KW | 48KW |
| Container | ||||
| Max. Container Volume | 2.5L | 2.5L | 0.75L | 2.25L |
| Neck Diameter Range | 32mm | 32mm | 32mm | 32mm |
| Max. Container Diameter | 110mm | 110mm | 73mm | 110mm |
| Max. Container Height | 350mm | 350mm | 220mm | 360mm |
| Air system | ||||
| Low Air consumption | 8-10Bar | 8-10Bar | 8-10Bar | 8-10Bar |
| High Air consumption | ≤35 Bar | ≤35 Bar | ≤35 Bar | ≤35 Bar |
| Dimension & Weight | ||||
| Blow molding machine | 3.37x2x2.2 m | 2.95×2.25×2.2m | 3.65×1.9×2.2m | 3.66×2.16x2m |
| Preform Autoloader | 2.1×1.3×2.55m | 2.4×1.4xx2.7m | 2.5×1.6×2.7m | 2.4×1.4×2.7m |
| Net Weight | 3T | 4T | 4T | 4.5T |
| General Information | MG-SS6SFT | MG-SS6SF | MG-SS6MFT | MG-SS6MF |
|---|---|---|---|---|
| Clamping Force | 70T | 45T | 70T | 75T |
| Clamping Stroke | 90mm | 90mm | 120mm | 110mm |
| Max. Stretching Stroke | 320mm | 320mm | 350mm | 350mm |
| Bottom Moving Stroke | 70mm | 70mm | 70mm | 70mm |
| Number of Cavities | 6 cavity | 6 cavity | 6 cavity | 6 cavity |
| Theoretical Output | 7000 BPH | 9000BPH | 6700 BPH | 8200BPH |
| Max. Mould Thickness | 200mm | 200mm | 320mm | 250mm |
| Electrical System | ||||
| Voltage Standard | 380v/3PH/50Hz | or special order | ||
| Number of Heating Zone | 4 Sections | 6 Sections | 4 Sections | 8 Sections |
| Total Power (Full Loaded) | 64 KW | 90KW | 96 KW | 120kw |
| Container | ||||
| Max. Container Volume | 0.75L | 0.75L | 1.5L | 1.5L |
| Neck Diameter Range | 32mm | 32mm | 32mm | 38mm |
| Max. Container Diameter | 70mm | 70mm | 85mm | 105mm |
| Max. Container Height | 220mm | 220mm | 320mm | 280mm |
| Air system | ||||
| Low Air consumption | 8-10Bar | 8-10Bar | 8-10Bar | 8-10Bar |
| High Air consumption | 30-35 Bar | 30-35 Bar | 30-35 Bar | 30-35 Bar |
| Dimension & Weight | ||||
| Blow molding machine | 3.8x2x2.2m | 4.9×2.2×2.3m | 4.6×2.25×2.2m | 4.9×2.2×2.3m |
| Preform Autoloader | 3.4×1.6×3.3m | 2.5×1.8×2.7m | 3.4×1.6×3.3m | 2.5×1.8×2.7m |
| Net Weight | 7T | 8T | 8T | 9T |
| General Information | MG-SS6BFT | MG-SS6BF | MG-SS8SF | MG-SS10SF | MG-SS12SF |
|---|---|---|---|---|---|
| Clamping Force | 70T | 45T | 45T | 75T | 90T |
| Clamping Stroke | 130mm | 130mm | 90mm | 90mm | 110mm |
| Max. Stretching Stroke | 350mm | 370mm | 320mm | 320mm | 350mm |
| Bottom Moving Stroke | 70mm | 70mm | 70mm | 70mm | 70mm |
| Number of Cavities | 6 cavity | 6 cavity | 8 cavity | 10 cavity | 12 Cavity |
| Theoretical Output | 6500 BPH | 8000BPH | 12000BPH | 14000BPH | 16000 BPH |
| Max. Mould Thickness | 320mm | 250mm | 200mm | 200mm | 200mm |
| Electrical System | |||||
| Voltage Standard | 380v/3PH/50Hz | or special order | |||
| Number of Heating Zone | 4 Sections | 8 Sections | 6 Sections | 10 Sections | 12 Sections |
| Total Power (Full Loaded) | 96 KW | 120kw | 100KW | 150KW | 170KW |
| Container | |||||
| Max. Container Volume | 2.5L | 2.5L | 0.75L | 0.75L | 0.75L |
| Neck Diameter Range | 32mm | 38mm | 32mm | 32mm | 32mm |
| Max. Container Diameter | 110 mm | 85mm | 70mm | 70mm | 70mm |
| Max. Container Height | 360mm | 350mm | 220mm | 220mm | 280mm |
| Air system | |||||
| Low Air consumption | 8-10Bar | 8-10Bar | 8-10Bar | 8-10Bar | 8-10Bar |
| High Air consumption | 30-35 Bar | 30-35 Bar | 30-35 Bar | 30-35 Bar | 30-35 Bar |
| Dimension & Weight | |||||
| Blow molding machine | 5.6×2.25×2.2m | 5.6×2.1×2.3m | 5.4X2.1X2.3m | 6.4×2.1×2.3m | _ _ |
| Preform Autoloader | 3.4×1.6×3.3m | 2.5×1.8×2.7m | 2.5×1.8×2.7m | 2.5×1.8×2.7m | _ _ |
| Net Weight | 8T | 9T | 9T | 10T | _ _ |
Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.
Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.